In analog pushpull power amplifiers the two output devices operate in antiphase (i.e. In this example, the NAND gate can 'source' 41mA. Totem pole basically an output driver circuit use to convert one level of voltage into another level of voltage. but whatever) and things would blow up if the output was shorted to ground for example. Infineon semiconductor solutions - MCUs, sensors, automotive & power management ICs, memories, USB, Bluetooth, WiFi, LED drivers, radiation hardened. These features may include trimmed oscillator for the control of accurate duty cycle, high gain amplifier, a temperature compensated reference, current sensing comparator and to control power MOSFET, there is a high current totem-pole output.
The major difference between it and a Push-Pull is the amount of current that it can sink or source. The STM32F103xx performance line family incorporates the high-performance ARM® Cortex™-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories, and an extensive range of enhanced I/Os and peripherals connected to two APB buses. A conventional amplifier stage which is not pushpull is sometimes called single-ended to distinguish it from a pushpull circuit. The output stage of the totem pole would be almost a short circuit (other than the limiting factor of the DC Current gain of the BJT. A Totem Pole output is essentially the same as a Push-Pull output however, it is the terminology commonly used when referring to a TTL device.
